Products tagged with 'two part adhesive'

ASI Epoxy Adhesive MP5405 is a two part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough semi-rigid material and is free flowing in viscosity. It features good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either dispensing equipment or side-by-side dual cartridges. A handling cure is normally achieved at room temperature within 3-5 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

ASI Structural Adhesive MP55420 is a high performance two part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, with excellent impact and weathering properties. This adhesive greatly increases the reliability of finished assemblies with exceptional flexibility, its ability to with stand extreme temperature fluctuation and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. For use on as received metal surfaces including aluminum, stainless and plated steels and forms tough, high strength bonds without surface preparation.

3M™ Scotch-Weld™ Epoxy Adhesive DP420 is a toughened, two-part epoxy structural adhesive that provides good strength along with high impact and fatigue resistance to meet demanding bonding challenges. Can replace mechanical fasteners, screws, rivets, and spot welds in many applications. This adhesive maintains bond strength at high and low temperatures and can withstand paint bake operations up to 400°F (204.4°C) for 60 minutes. It works well on a variety of substrates such as metals, ceramics, wood, glass, many composites, and plastics and is an excellent indoor bonding agent for joining, gluing, potting, panel bonding, and structural bonding.

3M™ Scotch-Weld™ Epoxy Adhesive DP420 is a toughened, two-part epoxy structural adhesive that provides good strength along with high impact and fatigue resistance to meet demanding bonding challenges. Can replace mechanical fasteners, screws, rivets, and spot welds in many applications. This adhesive maintains bond strength at high and low temperatures and can withstand paint bake operations up to 400°F (204.4°C) for 60 minutes. It works well on a variety of substrates such as metals, ceramics, wood, glass, many composites, and plastics and is an excellent indoor bonding agent for joining, gluing, potting, panel bonding, and structural bonding.

3M™ Scotch-Weld™ Epoxy Adhesive DP420 is a toughened, two-part epoxy structural adhesive that provides good strength along with high impact and fatigue resistance to meet demanding bonding challenges. Can replace mechanical fasteners, screws, rivets, and spot welds in many applications. This adhesive maintains bond strength at high and low temperatures and can withstand paint bake operations up to 400°F (204.4°C) for 60 minutes. It works well on a variety of substrates such as metals, ceramics, wood, glass, many composites, and plastics and is an excellent indoor bonding agent for joining, gluing, potting, panel bonding, and structural bonding.

3M™ Scotch-Weld™ Epoxy Adhesive DP460 Part A is the first part of a two-part adhesive kit. 3M™ Scotch-Weld™ Epoxy Adhesive DP460 is a toughened, two-part epoxy adhesive with a 2:1 mix ratio. It has a 60-minute work life and reaches handling strength in approximately four hours. This adhesive exhibits excellent shear and peel strength along with good impact durability. It bonds to many surfaces, such as ceramics, metals, glass, wood, and some plastics.