Epoxy Structural Adhesive Clear MP5405 50ML TWO-PART 15/CS

ASI Epoxy Adhesive MP5405 is a two part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough semi-rigid material and is free flowing in viscosity. It features good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either dispensing equipment or side-by-side dual cartridges. A handling cure is normally achieved at room temperature within 3-5 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.