Products tagged with 'two part adhesive'

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP8810NS is a low-odour, non-sag, toughened, two-part acrylic adhesive. Ideal choice for a wide variety of industrial and commercial applications since it reaches structural strength twice as fast as most other competitive acrylic adhesives with a comparable open time. It bonds difficult surfaces such as powder coats and most plastics. With a 10:1 mix ratio and a 10-minute work life, there's time to position substrates prior to adhesion. Once fully cured, it will reach 1,000 psi (7 MPa) of overlap shear strength in about 21 minutes, half the time of similar adhesives, increasing throughput and productivity while featuring high peel and impact performance.

LOCTITE® AA H8000 is a green, 2-part, non-sag, room temperature curing methacrylate acrylic adhesive system. It has a fast fixture time and excellent bond strength on multiple substrates including metals, plastics and composites. It also provides high elongation and excellent cold temperature impact strength. It forms resilient bonds and maintains its strength over a wide range of temperatures.

LOCTITE® AA H8000 is a green, 2-part, non-sag, room temperature curing methacrylate acrylic adhesive system. It has a fast fixture time and excellent bond strength on multiple substrates including metals, plastics and composites. It also provides high elongation and excellent cold temperature impact strength. It forms resilient bonds and maintains its strength over a wide range of temperatures.

LOCTITE® AA H8003 is a 2-part, room-temperature curing, acrylic-based adhesive system. It has a fast fixture time of <10 minutes and excellent bond strength on multiple substrates, including galvanized steel, plastics and composites. It needs little or no surface preparation, contains 10 mil (0.254mm / 0.01") spacer beads for bond line control, and offers superior peel and impact resistance.

LOCTITE® AA H8003 is a 2-part, room-temperature curing, acrylic-based adhesive system. It has a fast fixture time of <10 minutes and excellent bond strength on multiple substrates, including galvanized steel, plastics and composites. It needs little or no surface preparation, contains 10 mil (0.254mm / 0.01") spacer beads for bond line control, and offers superior peel and impact resistance.

LOCTITE® AA H8100 is a green, 2-part, non-sag, room temperature curing methacrylate acrylic adhesive. It is designed to have fast fixture time and excellent bond strength on multiple substrates including metals, plastics and composites. It provides high elongation and excellent cold temperature impact strength and forms resilient bonds. It maintains its strength over a wide range of temperatures.