Products tagged with 'two part adhesive'

3M™ Scotch-Weld™ Epoxy Adhesive DP460 Part B is the second part of a two-part adhesive kit. 3M™ Scotch-Weld™ Epoxy Adhesive DP460 is a toughened, two-part epoxy adhesive with a 2:1 mix ratio. It has a 60-minute work life and reaches handling strength in approximately four hours. This adhesive exhibits excellent shear and peel strength along with good impact durability. It bonds to many surfaces, such as ceramics, metals, glass, wood, and some plastics.

3M™ Scotch-Weld™ Epoxy Adhesive DP460NS is a non-sag, toughened, two-part epoxy adhesive with a 2:1 mix ratio. It has a 60-minute work life and reaches handling strength in approximately four hours. This adhesive exhibits excellent shear and peel strength along with good impact durability. It bonds to many surfaces, such as ceramics, metals, glass, wood, and some plastics.

3M™ Scotch-Weld™ Epoxy Adhesive DP460NS is a non-sag, toughened, two-part epoxy adhesive with a 2:1 mix ratio. It has a 60-minute work life and reaches handling strength in approximately four hours. This adhesive exhibits excellent shear and peel strength along with good impact durability. It bonds to many surfaces, such as ceramics, metals, glass, wood, and some plastics.

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810 is a toughened two-part acrylic adhesive that cures at room temperature and is specially formulated to bond oily metals, plastics, and other surfaces. With a low odour and non-flammable properties, this adhesive contributes to a safer work environment compared to typical acrylic adhesives. Features a strong shear and peel strength, but also good impact resistance for durability to meet demanding end-use applications. With a mix ratio of 1:1, it provides a 10-minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C).

3M™ Scotch-Weld™ Acrylic Adhesive DP8425NS is a non-sag, two-part acrylic adhesive. This tough adhesive offers improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product that features a fast rate of strength build to provide structural strength in just minutes. With a 10:1 mix ratio, it features a 23-minute work life to allow time to position substrates prior to adhesion. This working life, open time and cure time can be accelerated with heat. Once fully cured, this adhesive will reach 1,000 psi (7 MPa) of overlap shear strength in approximately 53 minutes, increasing throughput and productivity while featuring a high peel and impact performance. Full cure will be reached within 24 hours.

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP8805NS is a standard low-odour, non-sag, toughened two-part acrylic adhesive. Ideal choice for a wide variety of industrial and commercial applications since it reaches structural strength twice as fast as most other competitive acrylic adhesives with a comparable open time. It bonds difficult surfaces such as powder coats and most plastics. With a 10:1 mix ratio and a 4-minute work life there's time to position substrates prior to adhesion. Once fully cured it will reach 1,000 psi (7 MPa) of overlap shear strength in about 9 minutes, half the time of similar adhesives, increasing throughput and productivity while featuring high peel and impact performance.