ADHESIVES

3M™ Scotch-Weld™ Epoxy Adhesive DP460 Part B is the second part of a two-part adhesive kit. 3M™ Scotch-Weld™ Epoxy Adhesive DP460 is a toughened, two-part epoxy adhesive with a 2:1 mix ratio. It has a 60-minute work life and reaches handling strength in approximately four hours. This adhesive exhibits excellent shear and peel strength along with good impact durability. It bonds to many surfaces, such as ceramics, metals, glass, wood, and some plastics.

3M™ Scotch-Weld™ Epoxy Adhesive DP420 is a toughened, two-part epoxy structural adhesive that provides good strength along with high impact and fatigue resistance to meet demanding bonding challenges. Can replace mechanical fasteners, screws, rivets, and spot welds in many applications. This adhesive maintains bond strength at high and low temperatures and can withstand paint bake operations up to 400°F (204.4°C) for 60 minutes. It works well on a variety of substrates such as metals, ceramics, wood, glass, many composites, and plastics and is an excellent indoor bonding agent for joining, gluing, potting, panel bonding, and structural bonding.

LOCTITE® EA E-90FL is a grey, opaque, 2-part, toughened, medium viscosity, industrial grade solid epoxy adhesive. After curing at room temperature, it forms a flexible, grey bondline with excellent resistance to shock and impact, a wide range of chemicals and solvents and acts as an excellent electrical insulator. Suited for low-stress, high-impact bonding applications of dissimilar materials.

ASI Epoxy Adhesive MP5405 is a two part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough semi-rigid material and is free flowing in viscosity. It features good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either dispensing equipment or side-by-side dual cartridges. A handling cure is normally achieved at room temperature within 3-5 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD-1.5 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS material. Can be used to firestop up to 1-1/2” (38.1 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD2 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS material. Can be used to firestop up to two inches (50.8 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD3 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS material. Can be used to firestop up to 3 inches (76.2 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD4 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS Material. Can be used to firestop up to four inches (101.6 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).

Self-Seal® MW-300 Mineral Wool is ROXUL SAFE™, cut into a variety of different sized strips for easy installation with Self-Seal® Firestopping Products. It is a NON-COMBUSTIBLE specially formulated, pre-sized, semi-rigid mineral wool strip with a nominal 4.5 PCF (72 kg/m3) density. The combination of basalt rock and slag results in a non-combustible product with a melting point of approx. 1,177°C (2,150°F). This formulation gives excellent resistance to fire and is naturally water repellent, yet vapour permeable.

Self-Seal® MW-300 Mineral Wool is ROXUL SAFE™, cut into a variety of different sized strips for easy installation with Self-Seal® Firestopping Products. It is a NON-COMBUSTIBLE specially formulated, pre-sized, semi-rigid mineral wool strip with a nominal 4.5 PCF (72 kg/m3) density. The combination of basalt rock and slag results in a non-combustible product with a melting point of approx. 1,177°C (2,150°F). This formulation gives excellent resistance to fire and is naturally water repellent, yet vapour permeable.

Self-Seal® MW-300 Mineral Wool is ROXUL SAFE™, cut into a variety of different sized strips for easy installation with Self-Seal® Firestopping Products. It is a NON-COMBUSTIBLE specially formulated, pre-sized, semi-rigid mineral wool strip with a nominal 4.5 PCF (72 kg/m3) density. The combination of basalt rock and slag results in a non-combustible product with a melting point of approx. 1,177°C (2,150°F). This formulation gives excellent resistance to fire and is naturally water repellent, yet vapour permeable.

3M™ Scotch-Weld™ Flexible Acrylic Adhesive DP8610NS is a black, non-sag, low odour, two-part acrylic adhesive. Features a high elongation acrylic adhesive with structural strength that is ideal for bonding dissimilar materials, thin panel applications where bondline read-through is a concern, or any other application where a flexible bond is needed.

Tremco Polyurethane Foam Cleaner is a multi-purpose cleaning agent used to dissolve uncured or fresh polyurethane foam, formulated without the use of any ozone-depleting materials. The product is uniquely designed for cleaning of the one-component professional dispensing units, and for general cleaning purposes such as tools, work surfaces, etc.

UltraSeal® PF-10 Foam Cleaner is a cleaning solvent used to dissolve any uncured foam and adhesive foam from unwanted places. Uniquely designed for use with the Nuco dispensing guns. Designed for cleaning foam from clothing, tools, construction surfaces and other general cleaning purposes.

Evans 50102 Thermocol 102 is a hot melt glue stick commonly used for gluing porcelain and ceramic, toys, plastics, packing materials, wood and bamboo products, lamps and lanterns.

Surebonder Full Size All Temperature Glue Sticks 725R510 are clear all-purpose hot melt adhesives to be applied in either low, high, or dual temperature glue guns. This glue is great for craft projects and product assembly projects. A must for the DIY homeowner. Bonds to porous and non-porous materials. Each glue stick is 10-Inch in length and 7/16-inch in diameter. Approximately 90 pieces per box.

Dural M-259 Hot Melt Adhesive is a specialized low-temperature adhesive based on EVA, designed primarily for sealing cases and cartons, as well as various general bonding tasks. Its formulation ensures efficient processing, providing excellent machinability and reliable performance across diverse packaging applications.

Dural M-225 is a fast setting hot melt adhesive for case and carton sealing. It was designed for wrap around case sealers, which it is suitable for because of its superior hot tack and fast set speed. It can be used for clay coated board. Formulated as a general purpose product for packaging operations. Its water white colour makes it a natural choice for food & beverage related applications.

Dural Hot Melt Adhesive M-906 is a medium setting EVA adhesive recommended for craft and hobby projects. Its low melting temperature makes it a good adhesive to be applied on foam and balloons. This formula is versatile, tough and dries clear. Can be used in all standard, portable hand held applicators and hot melt systems.

3M™ Scotch-Weld™ Hot Melt Adhesive 3764-TCQ is a clear, 100% thermoplastic adhesive engineered to provide good shear and peel strength. It offers excellent impact resistance, delivering long-term durability and resilience for a long-lasting bond. Formulated to be flexible at low temperatures to ease modification and positioning during application. This is adhesive is capable of bonding many materials, including acrylic, ceramic, foam, glass, polycarbonate, polyethylene, polypropylene, and polyvinyl chloride (PVC) materials.

3M™ Scotch-Weld™ Hot Melt Adhesive 3762LM-PG is 100% solids, thermoplastic resin formulated to grab and seal quickly to meet the demands of high-volume production settings such as packing, woodworking, and assembly. These features increase the speed of carton closures and provide adhesion to wood, paperboard, corrugated, and other fibrous substrates. It provides strong shear strength, which means your packages stay sealed and components stay bonded under most conditions.

3M™ Scotch-Weld™ Hot Melt Adhesive 3762LM-TCQ is 100% solids, thermoplastic resin formulated to grab and seal quickly to meet the demands of high-volume production settings such as packing, woodworking, and assembly. These features increase the speed of carton closures and provide adhesion to wood, paperboard, corrugated, and other fibrous substrates. It provides strong shear strength, which means your packages stay sealed and components stay bonded under most conditions.

3M™ Scotch-Weld™ Hot Melt Applicator AE II has been designed by combining the best features of a high volume industrial system into a compact, self-contained applicator. It is a high volume, high productivity industrial tool at a great value. Delivers up to 4 lbs of adhesive per hour for high volume production, features a contoured grip and wide trigger that provides operator comfort and precise control, and the rugged, high impact resin construction withstands daily industrial use.

3M™ Scotch-Weld™ Hot Melt Applicator Tips offer versatility when dispensing hot melt adhesives. Uniquely designed for our 3M™ Scotch-Weld™ Hot Melt Applicators, these tips can help maximize the use of our hot melt adhesives by improving productivity, optimizing precision, and reducing waste in your assembly process. Its fluted metal tip designed as a replacement for standard nozzles [9/100 in (0.23 cm)] on most 3M™ Scotch-Weld™ Hot Melt Applicators.

3M™ Scotch-Weld™ Industrial Adhesive 4799 is a brushable, heat-resistant adhesive that rapidly develops strength and provides good creep resistance. It has good adhesion to rubber (including EPDM) and many other materials like canvas and linoleum when bonding to metal, wood, and concrete, and dries to a flexible, heat and water resistant bond.