ADHESIVES

LOCTITE® high performance static mix nozzles for 10, 12 and 50ml cartridges (B & S-System) make light work of mixing 2-part adhesives to the ideal ratio. They work with both manual and pneumatic (compressed air powered) applicators, and come in multiple nozzle and tip styles.

LOCTITE® HY 4080 is a 2-part, opaque to slightly yellow, cyanoacrylate/acrylic hybrid structural bonding adhesive that provides excellent, powerful bonds on metals, composites and plastics. It fixes quickly at room temperature and has high operational strength within just an hour. LOCTITE® HY 4080 also has high shear strength over a wide range of temperatures, even in larger gaps.

LOCTITE® HY 4070 Universal Bonder is designed for the assembly of parts with bond gaps up to 0.2 in (5 mm), and/or for applications where the complete cure of excess adhesive is a must. The gel consistency prevents adhesive flow even on vertical surfaces. Ideally suited for applications where temperature and moisture resistance is required. Best application results are achieved with use of the LOCTITE cyanoacrylate mixing nozzle (contained in the 11 gram kit).

LOCTITE® AA H8003 is a 2-part, room-temperature curing, acrylic-based adhesive system. It has a fast fixture time of <10 minutes and excellent bond strength on multiple substrates, including galvanized steel, plastics and composites. It needs little or no surface preparation, contains 10 mil (0.254mm / 0.01") spacer beads for bond line control, and offers superior peel and impact resistance.

LOCTITE® AA H8003 is a 2-part, room-temperature curing, acrylic-based adhesive system. It has a fast fixture time of <10 minutes and excellent bond strength on multiple substrates, including galvanized steel, plastics and composites. It needs little or no surface preparation, contains 10 mil (0.254mm / 0.01") spacer beads for bond line control, and offers superior peel and impact resistance.

LOCTITE® HY 4090 is a high viscosity, off-white to light yellow gel. It opens completely new application areas in structural bonding – for the very first time combining instant adhesive properties with those for epoxies to give more striking benefits. Fixture time of 90 - 180 seconds and suitable for gaps up to 5 mm. Resistant to vibration, shock loads and impacts with the ability to bond dissimilar substrates.

3M™ Scotch-Weld™ Acrylic Adhesive DP8425NS is a non-sag, two-part acrylic adhesive. This tough adhesive offers improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product that features a fast rate of strength build to provide structural strength in just minutes. With a 10:1 mix ratio, it features a 23-minute work life to allow time to position substrates prior to adhesion. This working life, open time and cure time can be accelerated with heat. Once fully cured, this adhesive will reach 1,000 psi (7 MPa) of overlap shear strength in approximately 53 minutes, increasing throughput and productivity while featuring a high peel and impact performance. Full cure will be reached within 24 hours.

3M™ Scotch-Weld™ Acrylic Adhesive DP8507NS delivers long-lasting performance when bonding metal. Designed as a replacement for welding and mechanical fasteners, this non-sag adhesive delivers high-strength bonds on aluminum, cold-rolled steel, stainless steel, galvanized steel, copper, brass, and most plastics. Additionally, these bonds provide excellent durability, even in temperatures as low as -40°F (-40°C) and in powder coat and paint bake cycles up to 392°F (200°C) for 30 minutes.

3M™ Scotch-Weld™ Acrylic Adhesive DP8507NS delivers long-lasting performance when bonding metal. Designed as a replacement for welding and mechanical fasteners, this non-sag adhesive delivers high-strength bonds on aluminum, cold-rolled steel, stainless steel, galvanized steel, copper, brass, and most plastics. Additionally, these bonds provide excellent durability, even in temperatures as low as -40°F (-40°C) and in powder coat and paint bake cycles up to 392°F (200°C) for 30 minutes.

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810 is a toughened two-part acrylic adhesive that cures at room temperature and is specially formulated to bond oily metals, plastics, and other surfaces. With a low odour and non-flammable properties, this adhesive contributes to a safer work environment compared to typical acrylic adhesives. Features a strong shear and peel strength, but also good impact resistance for durability to meet demanding end-use applications. With a mix ratio of 1:1, it provides a 10-minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C).

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP8805NS is a standard low-odour, non-sag, toughened two-part acrylic adhesive. Ideal choice for a wide variety of industrial and commercial applications since it reaches structural strength twice as fast as most other competitive acrylic adhesives with a comparable open time. It bonds difficult surfaces such as powder coats and most plastics. With a 10:1 mix ratio and a 4-minute work life there's time to position substrates prior to adhesion. Once fully cured it will reach 1,000 psi (7 MPa) of overlap shear strength in about 9 minutes, half the time of similar adhesives, increasing throughput and productivity while featuring high peel and impact performance.

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP8810NS is a low-odour, non-sag, toughened, two-part acrylic adhesive. Ideal choice for a wide variety of industrial and commercial applications since it reaches structural strength twice as fast as most other competitive acrylic adhesives with a comparable open time. It bonds difficult surfaces such as powder coats and most plastics. With a 10:1 mix ratio and a 10-minute work life, there's time to position substrates prior to adhesion. Once fully cured, it will reach 1,000 psi (7 MPa) of overlap shear strength in about 21 minutes, half the time of similar adhesives, increasing throughput and productivity while featuring high peel and impact performance.

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810 is a toughened two-part acrylic adhesive that cures at room temperature and is specially formulated to bond oily metals, plastics, and other surfaces. With a low odour and non-flammable properties, this adhesive contributes to a safer work environment compared to typical acrylic adhesives. Features a strong shear and peel strength, but also good impact resistance for durability to meet demanding end-use applications. With a mix ratio of 1:1, it provides a 10-minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C).

LOCTITE® AA H8000 is a green, 2-part, non-sag, room temperature curing methacrylate acrylic adhesive system. It has a fast fixture time and excellent bond strength on multiple substrates including metals, plastics and composites. It also provides high elongation and excellent cold temperature impact strength. It forms resilient bonds and maintains its strength over a wide range of temperatures.

LOCTITE® AA H8000 is a green, 2-part, non-sag, room temperature curing methacrylate acrylic adhesive system. It has a fast fixture time and excellent bond strength on multiple substrates including metals, plastics and composites. It also provides high elongation and excellent cold temperature impact strength. It forms resilient bonds and maintains its strength over a wide range of temperatures.

LOCTITE® AA H8100 is a green, 2-part, non-sag, room temperature curing methacrylate acrylic adhesive. It is designed to have fast fixture time and excellent bond strength on multiple substrates including metals, plastics and composites. It provides high elongation and excellent cold temperature impact strength and forms resilient bonds. It maintains its strength over a wide range of temperatures.

ASI Structural Adhesive MP55420 is a high performance two part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, with excellent impact and weathering properties. This adhesive greatly increases the reliability of finished assemblies with exceptional flexibility, its ability to with stand extreme temperature fluctuation and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. For use on as received metal surfaces including aluminum, stainless and plated steels and forms tough, high strength bonds without surface preparation.

ASI Structural Adhesive MP55420 is a high performance two part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, with excellent impact and weathering properties. This adhesive greatly increases the reliability of finished assemblies with exceptional flexibility, its ability to with stand extreme temperature fluctuation and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. For use on as received metal surfaces including aluminum, stainless and plated steels and forms tough, high strength bonds without surface preparation.

LOCTITE® 567 is a white, 1-part thread sealant designed for the locking and sealing of tapered metal pipe threads and fittings. As an anaerobic-curing thread sealant, it cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Its high lubricating properties prevent galling on stainless steel, aluminum and all other metal pipe threads, and allows ease of disassembly. The product offers high temperature performance and oil tolerance. And it tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.

LOCTITE® 5113 is an off-white, smooth, solvent-based paste for general purpose metal pipe sealing. Typical applications include lubricating and sealing threaded pipes, pipe fittings and flanges. Ideal for water pipes. Can be used on lines carrying alkalis (10%), ethylene glycol, petroleum and lubricating oil. It can withstand temperatures ranging from -59.8°F to +300.2°F (-51 °C to +149 °C).

LOCTITE® 262 is a red, general purpose, medium to high strength, thixotropic methacrylate-based adhesive. Steel fixture time is 15 min, brass 8 min and stainless steel 180 min. It fluoresces under UV light to allow monitoring. Ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners.

LOCTITE® 263 is a red, high-strength, primerless threadlocker for permanently locking and sealing bolts, nuts and studs to prevent loosening due to vibration. It works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces without the use of primer. Suitable for use on most oil-coated, “as-received” fasteners without cleaning.

LOCTITE® 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools.

LOCTITE® 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools.

LOCTITE® 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools.