Tesa

tesa® Softprint 52018 STM is a double-coated foam tape, designed specifically for mounting photopolymer plates with a thickness of 1.14mm (0.045") or 1.70 mm (0.067") in flexographic label printing. The x-soft foam makes this the ideal solution for printing fine screens.

tesa® Softprint 52018 STM is a double-coated foam tape, designed specifically for mounting photopolymer plates with a thickness of 1.14mm (0.045") or 1.70 mm (0.067") in flexographic label printing. The x-soft foam makes this the ideal solution for printing fine screens.

tesa® Softprint 52018 STM is a double-coated foam tape, designed specifically for mounting photopolymer plates with a thickness of 1.14mm (0.045") or 1.70 mm (0.067") in flexographic label printing. The x-soft foam makes this the ideal solution for printing fine screens.

tesa® 52060 Softprint BigFoam is a double-coated foam tape designed specifically for mounting photopolymer plates in wide-web film and paper flexographic printing. Due to its medium hardness foam it is particularly suited for high quality combination of half-tone and solid work. The special adhesive ensures simple mounting, easy repositioning, and demounting of plate and tape without residues. Designed specifically for mounting photopolymer plates in wide-web film and paper flexographic printing.

tesa® 52664 is a double-sided tape of 380 μm (15 mil) thickness with a cloth backing and a rubber adhesive. Suitable for corrugated postprint plate mounting, where the tape is first applied to the printing plate, then the liner is removed and the plate is attached to the carrier film. The cloth backing provides a high degree of flexibility, facilitating easy plate mount, while the well-proven adhesive ensures a reliable yet removable bond between printing plate and carrier film.

tesa® Softprint 72022 is a double-sided foam plate mounting tape. Foam characteristics include a low tolerance for thickness and enduring, consistent recovery features. The adhesive system has a high-tack surface, moderate bonding and demounting capabilities for plates, and adequate tape adhesion on the sleeve side. Designed for mounting of 1.14 mm (0.045'') and 1.70 mm (0.067'') flexographic printing plates onto steel /alu /PU and glassine cylinders.