TAPE

SIGA Wetguard® 200 SA is a semi impermeable, robust and non-slippery transparent self-adhered membrane that protects mass timber elements from moisture damage during construction. Its water-repellent carrier is lined with an anti-slip coating to keep workers safe while walking across wet surfaces. The self-adhered membrane can be factory applied for increased quality control and added protection during transport or installed on site.

3M™ Air and Vapour Barrier Through Wall Flashing Tape 3015TWF is a very tough and resilient flashing membrane, designed to stick to a wide range of building materials without the use of primers. The self-adhering membrane can be applied in temperatures ranging from -18°C to 66°C (0°F to 150°F), and is UV resistant for up to 24 months, making it ideal for both short-term and long-running construction projects. These increased temperature ranges can reduce or eliminate cold-weather related delays, extending the construction season in cold climates and enabling year-round construction in moderate zones.

3M™ Air and Vapour Barrier Through Wall Flashing Tape 3015TWF is a very tough and resilient flashing membrane, designed to stick to a wide range of building materials without the use of primers. The self-adhering membrane can be applied in temperatures ranging from -18°C to 66°C (0°F to 150°F), and is UV resistant for up to 24 months, making it ideal for both short-term and long-running construction projects. These increased temperature ranges can reduce or eliminate cold-weather related delays, extending the construction season in cold climates and enabling year-round construction in moderate zones.

3M™ Air and Vapour Barrier Through Wall Flashing Tape 3015TWF is a very tough and resilient flashing membrane, designed to stick to a wide range of building materials without the use of primers. The self-adhering membrane can be applied in temperatures ranging from -18°C to 66°C (0°F to 150°F), and is UV resistant for up to 24 months, making it ideal for both short-term and long-running construction projects. These increased temperature ranges can reduce or eliminate cold-weather related delays, extending the construction season in cold climates and enabling year-round construction in moderate zones.

3M™ Air and Vapour Barrier Through Wall Flashing Tape 3015TWF is a very tough and resilient flashing membrane, designed to stick to a wide range of building materials without the use of primers. The self-adhering membrane can be applied in temperatures ranging from -18°C to 66°C (0°F to 150°F), and is UV resistant for up to 24 months, making it ideal for both short-term and long-running construction projects. These increased temperature ranges can reduce or eliminate cold-weather related delays, extending the construction season in cold climates and enabling year-round construction in moderate zones.

3M™ Air and Vapour Barrier Through Wall Flashing Tape 3015TWF is a very tough and resilient flashing membrane, designed to stick to a wide range of building materials without the use of primers. The self-adhering membrane can be applied in temperatures ranging from -18°C to 66°C (0°F to 150°F), and is UV resistant for up to 24 months, making it ideal for both short-term and long-running construction projects. These increased temperature ranges can reduce or eliminate cold-weather related delays, extending the construction season in cold climates and enabling year-round construction in moderate zones.

Achem House Sheathing Tape HWX39 is a high-quality tape made from biaxially oriented polypropylene (BOPP) film. It features a high performance solvent-based acrylic adhesive that performs well across a wide temperature range. This tape is specifically engineered for sealing and joining seams, as well as securing cuts in house wrap sheathing materials. It is effective even in sub-freezing conditions and offers excellent adhesion and strength on slightly uneven surfaces.

tesa® 50605 is a 90 μm/3.5 mils translucent double-sided splicing tape consisting of a non-woven carrier coated with an acrylic adhesive, covered by a white paper liner. The special adhesive formulation ensures a secure bond on a variety of paper materials, even at elevated temperatures.

Hystik 410 double-sided tape features a polyester backing and acrylic adhesive, providing strong bonding capabilities across a variety of surfaces, including paper, cardboard, and low surface energy (LSE) materials. Its flexibility allows it to conform to irregular shapes, making it ideal for flying splices in diverse industrial applications, whether applied manually or automatically. The tape is primarily utilized in industries such as manufacturing, packaging, and logistics, and serves key market segments including hardware, paint and construction, as well as self-service and big box retail.

tesa® 51914 is a double-sided tape designed for repulpability, featuring a tissue paper backing and a modified water-soluble acrylic adhesive. It is ideal for flying splices within the printing and paper manufacturing sectors, exhibiting exceptional tack properties and strong adhesion on both coated and uncoated papers. The tape also demonstrates good shear strength and repulpability across a wide pH range (pH 3 to pH 9), and is produced from paper sourced from well-managed certified forests and other controlled sources.

tesa® 4961 is a double-sided tape that consists of a natural rubber adhesive and special paper backing. The ”hard” adhesive system provides good shear resistance and can also be removed without leaving adhesive residues. Designed for splicing of paper and film, self-adhesive mounting of sanding discs and general mounting on smooth surfaces.

tesa® 4090 strapping tape has a strong tensilized polypropylene backing with a rubber resin adhesive. The adhesive has good initial tack and high shear resistance. Properly applied tape shrinks around loads and holds them tightly. Impact strength allows give-and-take without snapping. Designed for palletizing and unitizing corrugated and paper board boxes and non-critical bundling applications.

tesa® 4090 strapping tape has a strong tensilized polypropylene backing with a rubber resin adhesive. The adhesive has good initial tack and high shear resistance. Properly applied tape shrinks around loads and holds them tightly. Impact strength allows give-and-take without snapping. Designed for palletizing and unitizing corrugated and paper board boxes and non-critical bundling applications.

tesa® 4090 strapping tape has a strong tensilized polypropylene backing with a rubber resin adhesive. The adhesive has good initial tack and high shear resistance. Properly applied tape shrinks around loads and holds them tightly. Impact strength allows give-and-take without snapping. Designed for palletizing and unitizing corrugated and paper board boxes and non-critical bundling applications.

tesa® 4287 is a general purpose strapping tape with tensilized polypropylene backing and rubber adhesive to provide good initial tack. The mono-oriented polypropylene backing exhibits high conformability, good tensile strength, and low elongation. With effortless dispensing, our tape accommodates both manual and automatic operations, making it the go-to choice for streamlined packaging processes.

tesa® 4287 is a general purpose strapping tape with tensilized polypropylene backing and rubber adhesive to provide good initial tack. The mono-oriented polypropylene backing exhibits high conformability, good tensile strength, and low elongation. With effortless dispensing, our tape accommodates both manual and automatic operations, making it the go-to choice for streamlined packaging processes.

tesa® 4287 is a general purpose strapping tape with tensilized polypropylene backing and rubber adhesive to provide good initial tack. The mono-oriented polypropylene backing exhibits high conformability, good tensile strength, and low elongation. With effortless dispensing, our tape accommodates both manual and automatic operations, making it the go-to choice for streamlined packaging processes.

tesa® 4287 is a general purpose strapping tape with tensilized polypropylene backing and rubber adhesive to provide good initial tack. The mono-oriented polypropylene backing exhibits high conformability, good tensile strength, and low elongation. With effortless dispensing, our tape accommodates both manual and automatic operations, making it the go-to choice for streamlined packaging processes.

tesa® 4090 strapping tape has a strong tensilized polypropylene backing with a rubber resin adhesive. The adhesive has good initial tack and high shear resistance. Properly applied tape shrinks around loads and holds them tightly. Impact strength allows give-and-take without snapping. Designed for palletizing and unitizing corrugated and paper board boxes and non-critical bundling applications.

tesa® 4090 strapping tape has a strong tensilized polypropylene backing with a rubber resin adhesive. The adhesive has good initial tack and high shear resistance. Properly applied tape shrinks around loads and holds them tightly. Impact strength allows give-and-take without snapping. Designed for palletizing and unitizing corrugated and paper board boxes and non-critical bundling applications.

IPG TPP200 Clean Removal Specialty MOPP Tape is an economical clean removal MOPP tape designed for surface protection of appliances. Excellent adhesion and stain/residue free removal. Can be used for general strapping, light bundling, unitizing and palletizing.

tesa® 4288 is a conventional strapping tape with tensilized polypropylene backing. The rubber adhesive system provides high initial tack to both polar and non-polar surfaces. The mono-oriented polypropylene backing exhibits high conformability, good tensile strength, and low elongation. This allows high performance in medium-duty bundling, palletizing, and coil tabbing applications. With effortless dispensing, our tape accommodates both manual and automatic operations, making it the go-to choice for streamlined packaging processes.

tesa® 4288 is a conventional strapping tape with tensilized polypropylene backing. The rubber adhesive system provides high initial tack to both polar and non-polar surfaces. The mono-oriented polypropylene backing exhibits high conformability, good tensile strength, and low elongation. This allows high performance in medium-duty bundling, palletizing, and coil tabbing applications. With effortless dispensing, our tape accommodates both manual and automatic operations, making it the go-to choice for streamlined packaging processes.

tesa® 4288 is a conventional strapping tape with tensilized polypropylene backing. The rubber adhesive system provides high initial tack to both polar and non-polar surfaces. The mono-oriented polypropylene backing exhibits high conformability, good tensile strength, and low elongation. This allows high performance in medium-duty bundling, palletizing, and coil tabbing applications. With effortless dispensing, our tape accommodates both manual and automatic operations, making it the go-to choice for streamlined packaging processes.

tesa® 4288 is a conventional strapping tape with tensilized polypropylene backing. The rubber adhesive system provides high initial tack to both polar and non-polar surfaces. The mono-oriented polypropylene backing exhibits high conformability, good tensile strength, and low elongation. This allows high performance in medium-duty bundling, palletizing, and coil tabbing applications. With effortless dispensing, our tape accommodates both manual and automatic operations, making it the go-to choice for streamlined packaging processes.