Plate Mounting Tape

3M™ Flexomount Plate Mounting Tape 411DL is double linered, has a soft rubber adhesive, and flexographic plate mounting sticky back tape. 3M™ Flexomount™ tapes are the industry standard for printing solid and line work. The high adhesion helps reduce the tendency for plate edge lifting and makes it a good choice for long runs. This grey double coated tape helps provide uniform coverage of solids when halftone dot reproduction is not critical. Applications include mounting photopolymer print plates to flexographic printing cylinders or sleeve systems, mounting rubber printing plates to flexographic printing cylinders or sleeves.

tesa® 52060 Softprint BigFoam is a double-coated foam tape designed specifically for mounting photopolymer plates in wide-web film and paper flexographic printing. Due to its medium hardness foam it is particularly suited for high quality combination of half-tone and solid work. The special adhesive ensures simple mounting, easy repositioning, and demounting of plate and tape without residues. Designed specifically for mounting photopolymer plates in wide-web film and paper flexographic printing.

tesa® Softprint 52017 STM is a double-coated foam tape, designed specifically for mounting photopolymer plates with a thickness of 1.14mm (0.045") or 1.70 mm (0.067") in flexographic label printing. The soft foam makes this the ideal solution in printing screens and line work.

tesa® Softprint 52017 STM is a double-coated foam tape, designed specifically for mounting photopolymer plates with a thickness of 1.14mm (0.045") or 1.70 mm (0.067") in flexographic label printing. The soft foam makes this the ideal solution in printing screens and line work.

tesa® Softprint 72022 is a double-sided foam plate mounting tape. Foam characteristics include a low tolerance for thickness and enduring, consistent recovery features. The adhesive system has a high-tack surface, moderate bonding and demounting capabilities for plates, and adequate tape adhesion on the sleeve side. Designed for mounting of 1.14 mm (0.045'') and 1.70 mm (0.067'') flexographic printing plates onto steel /alu /PU and glassine cylinders.

tesa® Softprint 52018 STM is a double-coated foam tape, designed specifically for mounting photopolymer plates with a thickness of 1.14mm (0.045") or 1.70 mm (0.067") in flexographic label printing. The x-soft foam makes this the ideal solution for printing fine screens.

tesa® Softprint 52018 STM is a double-coated foam tape, designed specifically for mounting photopolymer plates with a thickness of 1.14mm (0.045") or 1.70 mm (0.067") in flexographic label printing. The x-soft foam makes this the ideal solution for printing fine screens.

tesa® Softprint 52018 STM is a double-coated foam tape, designed specifically for mounting photopolymer plates with a thickness of 1.14mm (0.045") or 1.70 mm (0.067") in flexographic label printing. The x-soft foam makes this the ideal solution for printing fine screens.

tesa® Softprint 52018 STM is a double-coated foam tape, designed specifically for mounting photopolymer plates with a thickness of 1.14mm (0.045") or 1.70 mm (0.067") in flexographic label printing. The x-soft foam makes this the ideal solution for printing fine screens.

tesa® Softprint 52018 STM is a double-coated foam tape, designed specifically for mounting photopolymer plates with a thickness of 1.14mm (0.045") or 1.70 mm (0.067") in flexographic label printing. The x-soft foam makes this the ideal solution for printing fine screens.