Loctite

LOCTITE® AA H8003 is a 2-part, room-temperature curing, acrylic-based adhesive system. It has a fast fixture time of <10 minutes and excellent bond strength on multiple substrates, including galvanized steel, plastics and composites. It needs little or no surface preparation, contains 10 mil (0.254mm / 0.01") spacer beads for bond line control, and offers superior peel and impact resistance.

LOCTITE® AA H8100 is a green, 2-part, non-sag, room temperature curing methacrylate acrylic adhesive. It is designed to have fast fixture time and excellent bond strength on multiple substrates including metals, plastics and composites. It provides high elongation and excellent cold temperature impact strength and forms resilient bonds. It maintains its strength over a wide range of temperatures.

LOCTITE® EA 9017 (known as FIXMASTER® FAST CURE POXY PAK™ EPOXY) is a 2-part, room temperature curing epoxy adhesive used for high strength, permanent bonding of metals, ceramics, concrete, wood, glass and most plastics. This product can withstand temperatures up to +300°F (+149°C).

LOCTITE® EA E-90FL is a grey, opaque, 2-part, toughened, medium viscosity, industrial grade solid epoxy adhesive. After curing at room temperature, it forms a flexible, grey bondline with excellent resistance to shock and impact, a wide range of chemicals and solvents and acts as an excellent electrical insulator. Suited for low-stress, high-impact bonding applications of dissimilar materials.

LOCTITE® EA 0151 is a general purpose, ultra clear, thixotropic, epoxy paste adhesive for bonding glass, metals, circuit boards, fibre optics, and many plastics. It is easy to mix, and its 50-minute work-life allows for extended adjustment time. Cure is room temperature or heat.

LOCTITE® HY 4070 Universal Bonder is designed for the assembly of parts with bond gaps up to 0.2 in (5 mm), and/or for applications where the complete cure of excess adhesive is a must. The gel consistency prevents adhesive flow even on vertical surfaces. Ideally suited for applications where temperature and moisture resistance is required. Best application results are achieved with use of the LOCTITE cyanoacrylate mixing nozzle (contained in the 11 gram kit).