Products tagged with '3M'

3M™ Fire Barrier Sealant 15WB+ is a high-performance latex-based intumescent firestop sealant. When properly installed, this product provides up to three hours of fire protection in tested and listed systems. Ithelps prevent the spread of fire, smoke and noxious gas. In addition, this product acts as an acoustic barrier by minimizing noise transfer (STC-Rating of 54 when tested in a STC 54-rated wall assembly), helps create a smoke seal for systems requiring the optional L-Rating, meets the intent of LEED® green building program credits VOC environmental regulations, meets International Building Code (IBC) and other key life safety building code requirements.

3M™ FireDam™ Fire Barrier Sealant FD150+ is an acrylic latex caulk used to firestop metal pipes and cables through concrete or gypsum and for use in dynamic head-of-wall systems. A single-part, sag-resistant, water-based acrylic latex sealant, this sealant has excellent adhesion characteristics to most common construction materials. In addition, since it dries to the touch within one hour, it can be painted for a more professional-looking job.

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD-1.5 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS material. Can be used to firestop up to 1-1/2” (38.1 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD2 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS material. Can be used to firestop up to two inches (50.8 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD3 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS material. Can be used to firestop up to 3 inches (76.2 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD4 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS Material. Can be used to firestop up to four inches (101.6 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).