Products tagged with '3M'

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810 is a toughened two-part acrylic adhesive that cures at room temperature and is specially formulated to bond oily metals, plastics, and other surfaces. With a low odour and non-flammable properties, this adhesive contributes to a safer work environment compared to typical acrylic adhesives. Features a strong shear and peel strength, but also good impact resistance for durability to meet demanding end-use applications. With a mix ratio of 1:1, it provides a 10-minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C).

3M™ Scotch-Weld™ Acrylic Adhesive DP8425NS is a non-sag, two-part acrylic adhesive. This tough adhesive offers improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product that features a fast rate of strength build to provide structural strength in just minutes. With a 10:1 mix ratio, it features a 23-minute work life to allow time to position substrates prior to adhesion. This working life, open time and cure time can be accelerated with heat. Once fully cured, this adhesive will reach 1,000 psi (7 MPa) of overlap shear strength in approximately 53 minutes, increasing throughput and productivity while featuring a high peel and impact performance. Full cure will be reached within 24 hours.

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP8805NS is a standard low-odour, non-sag, toughened two-part acrylic adhesive. Ideal choice for a wide variety of industrial and commercial applications since it reaches structural strength twice as fast as most other competitive acrylic adhesives with a comparable open time. It bonds difficult surfaces such as powder coats and most plastics. With a 10:1 mix ratio and a 4-minute work life there's time to position substrates prior to adhesion. Once fully cured it will reach 1,000 psi (7 MPa) of overlap shear strength in about 9 minutes, half the time of similar adhesives, increasing throughput and productivity while featuring high peel and impact performance.

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP8810NS is a low-odour, non-sag, toughened, two-part acrylic adhesive. Ideal choice for a wide variety of industrial and commercial applications since it reaches structural strength twice as fast as most other competitive acrylic adhesives with a comparable open time. It bonds difficult surfaces such as powder coats and most plastics. With a 10:1 mix ratio and a 10-minute work life, there's time to position substrates prior to adhesion. Once fully cured, it will reach 1,000 psi (7 MPa) of overlap shear strength in about 21 minutes, half the time of similar adhesives, increasing throughput and productivity while featuring high peel and impact performance.

3M™ Scotch-Weld™ Dual Drive Manual Applicators are used to dispense two-component 3M™ Scotch-Weld™ Structural Adhesives packaged in Duo-Pak (DP) cartridges. There are a variety of applicators available to match the needs of your manufacturing process. Manual hand motion drives the dual pistons directly into the Duo-Pak cartridge, applying equal pressure and feeding the two components of the adhesive directly into the mixing nozzle (sold separately). These manual applicators offer take-it-to-the job convenience: no air hoses or electrical cords necessary.

3M™ Scotch-Weld™ Plus II Applicator W 2:1 and 1:1 Plunger is a self-contained metering, mixing and dispensing machine that simultaneously meters and mixes two-part adhesives as the material is applied. Simultaneously meters and mixes two-part adhesives as the material is applied.